1/2 INCH Female NPT Bulkhead

QMP Part # 20020-1

Click Here to see MSRP in QMP pricelist. Threaded bulkhead with 1/2″ Female National Pipe Thread (NPT-F) Can be installed in a tank that has an opening big enough for the fitting to pass into Can be installed for wall thicknesses of up to ~3/4″ thick EPDM Gaskets are standard.

3/4 INCH Female NPT Bulkhead

QMP Part # 20021-2

Click Here to see MSRP in QMP pricelist. Threaded bulkhead with 3/4″ Female National Pipe Thread (NPT-F) Can be installed in a tank that has an opening big enough for the fitting to pass into Can be installed for wall thicknesses of up to ~3/4″ thick EPDM Gaskets are standard.

1 INCH Female NPT Bulkhead

QMP Part # 20022-2

Click Here to see MSRP in QMP pricelist. Threaded bulkhead with 1″ Female National Pipe Thread (NPT-F) Can be installed in a tank that has an opening big enough for the fitting to pass into Can be installed for wall thicknesses of up to ~3/4″ thick EPDM Gaskets are standard.

1 1/2 INCH Female NPT Bulkhead

QMP Part # 20024-1

Click Here to see MSRP in QMP pricelist. Threaded bulkhead with 1 1/2″ Female National Pipe Thread (NPT-F) Can be installed in a tank that has an opening big enough for the fitting to pass into Can be installed for wall thicknesses of up to ~3/4″ thick EPDM Gaskets are standard.

2 INCH Female NPT Bulkhead

QMP Part # 20025-2

Click Here to see MSRP in QMP pricelist. Threaded bulkhead with 2″ Female National Pipe Thread (NPT-F) Can be installed in a tank that has an opening big enough for the fitting to pass into Can be installed for wall thicknesses of up to ~3/4″ thick Compatible with 2″ siphon Tube for some applications (QMP Part #20090-1) EPDM Gaskets are standard.

2 INCH Female NPT Bolted Bulkhead

QMP Part # 20088-1

Click Here to see MSRP in QMP pricelist. Bolted bulkhead with 2″ Female National Pipe Thread (NPT-F) Can be installed in a tank that has an opening big enough for the fitting to pass into Bulkhead will sandwich the plastic wall together with it’s two gaskets to provide a very strong seal Can be installed for wall thicknesses of up to ~1″ thick Compatible with 2″ siphon Tube for some applications (QMP Part #20090-1) EPDM Gaskets are standard.

2 INCH Female NPT Bolted Bulkhead - LONG BOLT

QMP Part # 20102-1

Click Here to see MSRP in QMP pricelist. Bolted Bulkhead with 2″ Female National Pipe Thread (NPT-F) Can be installed in a tank that has an opening big enough for the fitting to pass into Comes with custom longer bolts to span thicker tank walls Can be installed for wall thicknesses of up to ~1.25″ thick Compatible with 2″ siphon Tube for some applications (QMP Part #20090-1) EPDM Gaskets are standard.

2 INCH Female NPT Stainless Steel Bulkhead

QMP Part # 20077-1

Click Here to see MSRP in QMP pricelist. Stainless Steel Bulkhead with 2″ Female National Pipe Thread (NPT-F) Stainless Steel for custom applications where plastic cannot be used Can be installed in a tank that has an opening big enough for the fitting to pass into Can be installed for wall thicknesses of up to ~1.25″ thick Compatible with 2″ siphon Tube for some applications (QMP Part #20090-1) EPDM Gaskets are standard.

3 INCH Female NPT Bulkhead

QMP Part # 20028-2

Click Here to see MSRP in QMP pricelist. Bulkhead with 3″ Female National Pipe Thread (NPT-F) Can be installed in a tank that has an opening big enough for the fitting to pass into Can be installed for wall thicknesses of up to ~1″ thick Compatible with 3″ siphon Tube for some applications (QMP Part #20091-1) EPDM Gaskets are standard.

3 INCH Female NPT Bolted Bulkhead

QMP Part # 20089-1

Click Here to see MSRP in QMP pricelist. Bolted Bulkhead with 3″ Female National Pipe Thread (NPT-F) Can be installed in a tank that has an opening big enough for the fitting to pass into Can be installed for wall thicknesses of up to ~1″ thick Compatible with 3″ siphon Tube for some applications (QMP Part #20091-1) EPDM Gaskets are standard. Viton Gaskets available.

3 INCH Female NPT Bolted Bulkhead - LONG BOLT

QMP Part # 20093-1

Click Here to see MSRP in QMP pricelist. Bolted Bulkhead with 3″ Female National Pipe Thread (NPT-F) Can be installed in a tank that has an opening big enough for the fitting to pass into Comes with custom longer bolts to span thicker tank walls Can be installed for wall thicknesses of up to ~1.25″ thick Compatible with 3″ siphon Tube for some applications (QMP Part #20091-1) EPDM Gaskets are standard. Viton Gaskets available.

3 INCH Female NPT Stainless Steel Bulkhead

QMP Part # 20082-1

Click Here to see MSRP in QMP pricelist. Stainless Steel Bulkhead with 3″ Female National Pipe Thread (NPT-F) Stainless Steel for custom applications where plastic cannot be used Can be installed in a tank that has an opening big enough for the fitting to pass into Can be installed for wall thicknesses of up to ~1.25″ thick EPDM Gaskets are standard.

5 INCH Non-Vented Lid

QMP Part # 30024-1

Click Here to see MSRP in QMP pricelist. Two part lid consists of female threaded ring (installed on hole in tank) and male threaded lid Female threaded ring has stainless steel screws to drill into the tank wall, which allows the lid to be threaded on Lid is not vented

5 INCH Vented Lid

QMP Part # 30017-1

Click Here to see MSRP in QMP pricelist. Two part lid consists of female threaded ring (installed on hole in tank) and male threaded lid Female threaded ring has stainless steel screws to drill into the tank wall, which allows the lid to be threaded on Lid is vented

8 INCH Non-Vented Lid

QMP Part # 30003-1

Click Here to see MSRP in QMP pricelist. Two part lid consists of female threaded ring (installed on hole in tank) and male threaded lid Female threaded ring has stainless steel screws to drill into the tank wall, which allows the lid to be threaded on Lid is not vented

8 INCH Vented Lid

QMP Part # 30004-1

Click Here to see MSRP in QMP pricelist. Two part lid consists of female threaded ring (installed on hole in tank) and male threaded lid Female threaded ring has stainless steel screws to drill into the tank wall, which allows the lid to be threaded on Lid is vented

12 INCH Non-Vented Lid

QMP Part # 30026-1

Click Here to see MSRP in QMP pricelist. Two part lid consists of female threaded ring (installed on hole in tank) and male threaded lid Female threaded ring has stainless steel screws to drill into the tank wall, which allows the lid to be threaded on Lid is not vented

12 INCH Vented Lid

QMP Part # 30005-1

Click Here to see MSRP in QMP pricelist. Two part lid consists of female threaded ring (installed on hole in tank) and male threaded lid Female threaded ring has stainless steel screws to drill into the tank wall, which allows the lid to be threaded on Lid is vented

16 INCH Non-Vented Lid

QMP Part # 30019-1

Click Here to see MSRP in QMP pricelist. Two part lid consists of female threaded ring (installed on hole in tank) and male threaded lid Female threaded ring has stainless steel screws to drill into the tank wall, which allows the lid to be threaded on Lid is not vented

16 INCH Vented Lid

QMP Part # 30006-1

Click Here to see MSRP in QMP pricelist. Two part lid consists of female threaded ring (installed on hole in tank) and male threaded lid Female threaded ring has stainless steel screws to drill into the tank wall, which allows the lid to be threaded on Lid is vented

16 INCH Vented Lid - Hinged Style

QMP Part # 30013-1

Click Here to see MSRP in QMP pricelist. Lid is hinged so it cannot become removed or lost Lid is screwed into the tank wall with stainless steel screws Lid is vented

16 INCH Vented Lid - Locking Hinged Style

QMP Part # 30028-1

Click Here to see MSRP in QMP pricelist. Lid is hinged so it cannot become removed or lost Lid is equipped with a lockable clasp, to prevent opening the tank without permission Lid is screwed into the tank wall with stainless steel screws Lid is vented

22 INCH Non-Vented Lid

QMP Part # 30027-1

Click Here to see MSRP in QMP pricelist. Two part lid consists of female threaded ring (installed on hole in tank) and male threaded lid Female threaded ring has stainless steel screws to drill into the tank wall, which allows the lid to be threaded on Lid is not vented

22 INCH Vented Lid

QMP Part # 30025-1

Click Here to see MSRP in QMP pricelist. Two part lid consists of female threaded ring (installed on hole in tank) and male threaded lid Female threaded ring has stainless steel screws to drill into the tank wall, which allows the lid to be threaded on Lid is vented

22 INCH Vented Lid - Locking Hinged Style

QMP Part # 30029-1

Click Here to see MSRP in QMP pricelist. Lid is hinged so it cannot become removed or lost Lid is equipped with a lockable clasp, to prevent opening the tank without permission Lid is screwed into the tank wall with stainless steel screws Lid is vented

2 INCH Threaded Cap

QMP Part # 30023-1

Click Here to see MSRP in QMP pricelist. 2″ Threaded replacement cap

3 INCH Threaded Cap

QMP Part # 30000-1

Click Here to see MSRP in QMP pricelist. 3″ Threaded replacement cap

5 INCH Threaded Cap

QMP Part # 30001-1

Click Here to see MSRP in QMP pricelist. 5″ Threaded Replacement cap Same cap used on QMP document tube (#60117-1)

7 INCH Threaded Cap

QMP Part # 30014-1

Click Here to see MSRP in QMP pricelist. 7″ Threaded Replacement cap

9 INCH Threaded Cap

QMP Part # 30022-1

Click Here to see MSRP in QMP pricelist. 9″ Threaded Replacement cap

8 INCH Plastic Mesh

QMP Part # 30009-1

Click Here to see MSRP in QMP pricelist. 8″ Plastic Mesh Screen/Strainer Fits inside 8″ Vented (Part #30004-1)/Non-vented (Part #30003-1) lids

12 INCH Plastic Mesh

QMP Part # 30010-1

Click Here to see MSRP in QMP pricelist. 12″ Plastic Mesh Screen/Strainer Fits inside 12″ Vented (Part #30005-1)/Non-vented (Part #30026-1) lids

15 INCH Plastic Mesh

QMP Part # 30011-1

Click Here to see MSRP in QMP pricelist. 15″ Plastic Mesh Screen/Strainer Fits inside 16″ Vented (Part #30006-1, 30013-1, 30028-1)/Non-vented (Part #30019-1) lids

2 INCH Siphon Tube

QMP Part # 20090-1

Click Here to see MSRP in QMP pricelist. Siphon tubes are used for applications that require access to pull water/fluid from the bottom of a tank Fits all QMP 2″ NPT-F bulkhead fittings(

3 INCH Siphon Tube

QMP Part # 20091-1

Click Here to see MSRP in QMP pricelist. Siphon tubes are used for applications that require access to pull water/fluid from the bottom of a tank Fits all QMP 3″ NPT-F bulkhead fittings(

2 INCH Electrical Cord Grommet

QMP Part # 20106-1

Click Here to see MSRP in QMP pricelist. Electrical Cord Grommet used for sealing a sump pit (Part # 60162-3) Replacement grommet for sump pits (#60162-2)(

2 INCH Multi-Size Pipe Grommet

QMP Part # 20107-1

Click Here to see MSRP in QMP pricelist. Grommet has cut-outs sized to 1 1/4″ pipe, 1 1/2″ pipe, and 2″ pipe( Grommet used for sealing a sump pit (Part # 60162-3) Replacement grommet for sump pits (#60162-2)(

8 lb Tank Float

QMP Part # 60138-1

Click Here to see MSRP in QMP pricelist. Tank Float is weighted for oilfield use